Відео

Subscribed! All these consumer torches are too cheaply made. Durable grommet material like Viton isn't expensive in industrial quantities.

Is this behind the engine?

I just got an old 310 got it running but can't figure out how to switch to high gear. Can you help me out?

We use SMT (Spray Master Technology) pump systems at work. We have a dozen of their units both fixed and portable and get used several times a day. If we lose pressure and it’s not that relief valve, We just replace the entire pump head vs rebuilding the high pressure manifold. The tolerances are tight and even slight wear will cause pressure loss. With that being said There should be a bypass to that pump that dumps pressure when you stop spraying. Is that possibly stuck in the bypass position??

Are u still around?

You still have those electric clutches? If so I’ll buy em from you.

Thanks for the knowledge.

I have a nearly identical cart that has the same problem. I have been meaning to address this for a while.

Awesome thanks had same problem got 4 wheels. Need one fix to finish my job. And this video helped me get it done 👍👍 👍🔥🔥🔥😎

has anyone tried a motor oil/ bar chain oil mix in one of these sprayers?

How did the magnet help it to work? What occurred there

And BTW - THANK YOU!. I've been looking at my 1980 vette's engine positioning for 1.5 years, and thinking "no way it's not symmetrical, must be something wrong with my eyes"..... So now I know I'm not imagining the shift. Have an Outstanding evening. Mike.

DUDE! That offset a9left-to-right) reeks havoc on my OCD. 🙂

I know this is an old video… I may need to change my fuel pump out. This video looks straight forward but he didn’t address the possibility of the internal cam not lining up when installing the new pump. That’s the only thing that concerns me. I don’t know what to do if that happens to me.

I’ve tried it all. The green Rescue bags and plastic jars work the best I’ve found BUT my concern is they attract more flys into the area. So now I’m using those on the outskirts of my yard in trees to keep them away from the house and around the deck and outside of the house I’m using the Alpine PT spray bait and it seems to really be helping close to the house.

What tires and wheels are those? I need to get a set!

This things are powerful

Hey Buddy! This is your latest video, so i write here. I watched all your videos about the bobcat 310. Now i got the same machine at my from my boddy for repair. They changed the hydraulic pump on it. After pump change it does the same as yours in your latest video. My only problem is, then on our model the hydraulic filter is after the control valve, and before the suction block on the return line. In my mind this is 1000% inefficient, because i have seen your video where u cut open the filters. If it sucks anything up, it wont stop in the filter, because first it goes through the whole system. Anyway, the filter were there, and with the old pump it was good, but a bit slow. With the new one its acting the same as yours in the last video. Pipes are all new, they cant collapse. One thing I didnt tested yet, if it gets air from outside. I think its creating vacume, and thats why it struggles to suck up oil from the sump. So my question is: U know anything about an air inlet anywhere on the hydraulic tank? If yes, could you tell me where should it be? Also because my filter is after the control valve, if it clogs, it should blow apart, or the bypass valve in it should open up, and leave the return oil unfiltered. BUT then again, i have oil flow. SO the question again: Can i have vacum in the tank, to make this problem? Thanks David

Resin formulations may contain toxic chemicals or volatile organic compounds (VOCs) that can be harmful when inhaled or absorbed through the skin. Long-term exposure to these chemicals may lead to chronic health issues. Not to add the paint to this topic.

Thank you Bro 🙌👌🙏

With fixing the forklift. I have a place to sell it

Because its north start

That's awesome in this world that we live in that he still choosing to follow the lord keep up the good parenting

Easy cheap fix thankfully!!!

The. Grinch. Ayo. This. Guy. Has. A. Ring. Camera. Doorbell. And. The. Grinch. Is. Talking

Rather than fiddle with compass/ dividers, how about using a rap of tape ( however wide you need to make the cut off 1/2". ,3/4".). Good video helpful because i have a similar old cart i want to preserve.😮

I usually do the code test and do what you a doin and 😂😂😂

LOL

The extension pipe can be separated from the thermostat

How do you talk so fast

So funny

It might seem weird to you to mention stuff since I couldn't help with much so far; however, I am going to my garage and getting a box of trailer screws and bringing them to church for you.

I gots a chevy sonic 6'ramps bumper hits 2'before wheels touch ramps? Ill try this

2:08 /10:28 anybody knows that wiring diagram of that socket. i need to use different receiver module.

Say on a pair of air forces or Jordan’s. Would it harm the shoes?

Glad someone finally made a video about the mod and hopefully someone can reach through to icon to possibly remodel it or give those options for the customers that get this light like ourselves.

awsome thanks for sharing.

I had a similar LED kit (Horrible Freight most likely). The pure chinesium wires did not last one year. I add ground wires all the way to the lights because the frame connections always rust in my area.

Coming along nicely

Man, in this day and age, it would be extremely difficult to guide a child through the mess. Good job!

We can nudge and shove but it's ultimately their decisions. We just hope for the best.

I just want a post hole digger to play with. Hours of fun.

looking good

That thing was road hard and put up wet

Thats a good deal

This was one of the detailed video out there. I was looking for the past 2 days on how to fix with the adapter and was unlucky till i saw this video. My car is a sonata 2019 and it has the same headlights.

Can't see much you didn't turn a light on close by. Dark

You know where I can get the slide stop, bottom of mag piece part?I got a nut n bolt rig to stop it from uncoiling .

Your the man!Thanks

This is great, I had the same problem and couldn’t find where to fix it. This makes perfect sense, I’ll give it a try